Cat Electric Rope Shovels 7495 with HydraCrowd
Feature
Dipper Payload : 109.0 t
Dipper Capacity : 30.6-62.7 m3 (40-82 yd3)
Working Weight - With Dipper and Standard Links : 1390714.0 kg
Dipper Payload : 109.0 t
Dipper Capacity : 30.6-62.7 m3 (40-82 yd3)
Working Weight - With Dipper and Standard Links : 1390714.0 kg
 |
|---|
Name : Cat
Service Tel : （309）578-6298
E-mail :
Web Site : https://www.caterpillar.com/en.html
Address :
Electric rope shovels have been successfully removing overburden and ore on mine sites around the world for more than a century. Driven by a vision to make these highly productive machines safer, more reliable and even more productive, we challenged the status quo and built an electric rope shovel that's better.
| Dipper Payload | 120.0 t 109.0 t | More |
| Dipper Capacity | 30.6-62.7 m3 (40-82 yd3) 30.6-62.7 m3 (40-82 yd3) | More |
| Dipper Payload (Available Dipper Payloads Up To 109 Tonnes [120 tons] When Specified) | 120.0 t 109.0 t | More |
| Note | Dependent on application and material density Dependent on application and material density | More |
| Working Weight - With Dipper and Standard Links | 3066000.0 lb 1390714.0 kg | More |
| Ballast - Furnished By Customer | 667150.0 lb 302614.0 kg | More |
| Note (1) | These weights will vary slightly depending upon dipper and optional equipment selection These weights will vary slightly depending upon dipper and optional equipment selection | More |
| Note (2) | All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads | More |
| Crawler Dimensions - Overall Width 200.7 cm (79 in) Treads, Standard | 36.0 ft 11.0 m | More |
| Crawler Dimensions - Overall Width 259.1 cm (102 in) Treads | 38.0 ft 11.6 m | More |
| Ground Bearing Pressure - Note | Ground bearing pressure is dependent upon many factors Ground bearing pressure is dependent upon many factors | More |
| Ground Bearing Pressure - Total Effective Bearing Area (200.7 cm/79 in) Treads - Standard | 36 m2 (382 kPa); 386 ft2 (55 psi) 36 m2 (382 kPa); 386 ft2 (55 psi) | More |
| Ground Bearing Pressure - Total Effective Bearing Area (259.1 cm/102 in) Treads | 46.6 m2 (298 kPa); 501.7 ft2 (43 psi) 46.6 m2 (298 kPa); 501.7 ft2 (43 psi) | More |
| Hoist | A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. | More |
| Planetary Propel | Dual-motor independent drive Dual-motor independent drive | More |
| Swing | Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Two planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. | More |
| Upper Works Overall Width - Including Standard Walkways | 41.9 ft 12.8 m | More |
| Components (1) | Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room Six pumps (four for open gear lubricant and two for grease) located in an insulated, heated, double-walled lube room | More |
| Type | Automatic, single-line system for open gear lubricant and grease Automatic, single-line system for open gear lubricant and grease | More |
| Components (2) | External FastFil from lower level External FastFil from lower level | More |
| Drive | IGBT Acutrol drive system IGBT Acutrol drive system | More |
| Power Requirements - 50 Hz | 6,000V, 6,600V, 7,200V, 11,000V 6,000V, 6,600V, 7,200V, 11,000V | More |
| Power Requirements - 60 Hz | 7,200V, 13,800V 7,200V, 13,800V | More |
| Power Requirements - Average Power Demand | 945-1322 kW 945-1322 kW | More |
| Power Requirements - Note | Other voltage options available to suit customer requirements Other voltage options available to suit customer requirements | More |
| Power Requirements - Peak power | 3778 kW 3778 kW | More |
| Power Requirements - Voltage | 3 phase, 50/60 Hz, 7,200V 3 phase, 50/60 Hz, 7,200V | More |
| System Voltage - Nominal | 50/60 Hz, 7,200V 50/60 Hz, 7,200V | More |
| Crowd (1) | HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. HydraCrowd, hydraulic power skid, located at the front center of the revolving frame deck, powers a large hydraulic cylinder to move the dipper handle fore and aft. | More |
| Crowd (2) | (Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. (Optional) Rope Crowd, the crowd machinery is located at the front center of the revolving frame, consisting of motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft. | More |
| Rope Data - Boom Suspension - Diameter | 3.25 in 83.0 mm | More |
| Rope Data - Boom Suspension - No. | 4 4 | More |
| Rope Data - Dipper Trip - Diameter | 0.75 in 19.0 mm | More |
| Rope Data - Dipper Trip - No. | 1 1 | More |
| Rope Data - Hoist - Diameter | 2.75 in 70.0 mm | More |
| Rope Data - Hoist - No. | 2 2 | More |
| Rope Data - Note | High impact ropes available as an option High impact ropes available as an option | More |
| Type | One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle. | More |
| Cutting Height - Maximum | 53.5 ft 16.3 m | More |
| Cutting Radius - Maximum | 80.0 ft 24.4 m | More |
| Dumping Height - With Clearance to Open Dipper Door | 28.9 ft 8.8 m | More |
| Note (1) | Optimal working ranges based on loading a Cat 795F AC truck. Optimal working ranges based on loading a Cat 795F AC truck. | More |
| Note (2) | *All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads. *All specifications are based on a 56 m3 (73 yd3) dipper and standard 200.7 cm (79 in) treads. | More |
| Radius of Level Floor | 56.1 ft 17.1 m | More |
| Revolving Frame Tail Swing Radius | 30.5 ft 9.3 m | More |
