Cat M Series Motor Graders 14M3
Cat M Series Motor Graders 14M3

Cat M Series Motor Graders 14M3

Feature

Base Power (1st Gear) - Net : 178.0 kW

Operating Weight - Typically Equipped : 25968.0 kg

Blade Width : 4.2 m

Send Inquiry

Contact Cat

Name : Cat

Service Tel : （309）578-6298

E-mail :

Web Site : https://www.caterpillar.com/en.html

Address :

Feature Parameter

Technology

  • Optional Stable Blade improves grading precision by decreasing engine speed at 15 percent intervals when machine bounce is detected then increases engine rpm systematically when grader stabilizes.
  • Optional Cat GRADE with Cross Slope helps maintain desired cross slope by automatically controlling one side of the blade.
  • Optional Cat AccuGrade™ uses positioning and guidance technologies, machine sensors, and automatic blade control to help get to grade faster, easier, and more efficiently.
  • Optional Auto Articulation allows you to articulate automatically while steering in tight spaces or around curves, obstacles, and turnarounds.

Performance

  • Cat C13 ACERT™ engine meets U.S. EPA Tier 4 Final/EU Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent emission standards, depending on emission standards of specific country.
  • Standard Economy Mode can be turned on to limit maximum engine speed which helps reduce fuel consumption.
  • Standard VHP Plus provides ideal amount of power in all gears.
  • Standard Automatic Differential Lock unlocks differential during a turn and re-locks when straight for easier operation and improved power train protection.

Efficiency

  • Load-sensing system and advanced electrohydraulics give operator superior implement control and hydraulic performance.
  • Proportional Priority Pressure-Compensating valves have different flow rates for head and rod ends of cylinder so machine responds consistently and predictably.
  • Balanced hydraulic flow is proportioned to ensure all implements will operate simultaneously without slowing engine or speed of some implements.

Ease of Operation

  • Simple, intuitive joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue.
  • Optional Advanced Control Joysticks allow operator to control automated grading solutions efficiently and safely without removing hands from the joysticks.
  • Selectable blade lift modes – Fine, Normal, or Coarse – allow operator to match application requirements.
  • Articulation Return-to-Center automatically returns machine to a straight frame position from any angle with the touch of a button.

Safety

  • Optional rear vision camera enhances sight to rear of machine.
  • Electrical disconnect and engine shutoff switches are ground level.
  • Operator Presence System keeps parking brake engaged and hydraulic implements disabled until operator is seated and machine is ready for operation.
  • Hydraulic Lockout disables all implement functions while still providing machine steering control – especially useful while roading.
  • Optional seat belt indicator promotes safe operating habits.

Serviceability

  • Convenient access from the top of the circle to the patented top-adjust wear strips and inserts make them easy to add or replace.
  • Shimless Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.

Overview

Cat® Motor Graders continue the Caterpillar tradition of being the industry standard in heavy construction, road building, and governmental applications. The 14M3 features a host of integrated technology solutions that increase operator efficiency, boost productivity levels and lower owning and operating costs. The 14M3 takes advantage of a larger engine, increased fuel efficiency, improved machine balance, enhanced transmission performance, more powerful telematics and added operator safety/convenience features.

Engine

Units:
Base Power (1st Gear) - Net 238.0 HP 178.0 kW Less
Engine Model Cat C13 ACERT VHP Cat C13 ACERT VHP Less
Bore 5.1 in 130.0 mm Less
Stroke 6.2 in 157.0 mm Less
Speed at Rated Power 1,850 rpm 1,850 rpm Less
Emissions Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent Tier 4 Final/Stage IV, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent Less
Maximum Altitude - Full Power 13900.0 ft 4237.0 m Less
Maximum Altitude - Full Power (Tier 2) 12049.0 ft 3672.0 m Less
Maximum Altitude - Full Power (Tier 3) 14349.0 ft 4374.0 m Less
Maximum Torque - VHP Plus 1137.0 lb/ft 1542.0 N·m Less
Note (1) Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture. Less
Note (2) Optimized VHP Plus is standard for the 14M3. Optimized VHP Plus is standard for the 14M3. Less
Note (3) Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator. Less
Note (4) Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp) Power as declared per ISO 14396 – Rated rpm 1,850 – VHP+ = 228 kW (306 hp) Less
Standard - Fan Speed - Minimum 550 rpm 550 rpm Less
Standard Capability 122.0 °F 50.0 °C Less
Torque Rise 41% 41% Less
Note (5) Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: – Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. Less
Standard - Fan Speed - Maximum 1,600 rpm 1,600 rpm Less
Displacement 763.0 in³ 12.5 l Less
Number of Cylinders 6 6 Less

Frame

Circle - Outer Diameter 71.7 in 1822.0 mm Less
Front Axle - Total Oscillation per Side 32° 32° Less
Front Axle - Wheel Lean - Left/Right 17.1° 17.1° Less

Moldboard

Blade Width 14.0 ft 4.2 m Less
Arc Radius 16.3 in 413.0 mm Less
Throat Clearance 4.6 in 117.0 mm Less
Blade Height - With Cutting Edge 24.9 in 631.0 mm Less
Blade Height - Without Cutting Edge 23.0 in 585.0 mm Less
Blade Width - With End Bits 169.0 in 4290.0 mm Less
Blade Width - Without End Bits 164.0 in 4166.0 mm Less

Blade Range

Maximum Depth of Cut 17.2 in 438.0 mm Less
Blade Tip Range - Backward 5° 5° Less
Blade Tip Range - Forward 40° 40° Less
Circle Centershift - Left 25.6 in 650.0 mm Less
Circle Centershift - Right 20.5 in 520.0 mm Less
Maximum Lift Above Ground 16.5 in 419.0 mm Less
Maximum Shoulder Reach Outside of Tires - Left 73.6 in 1870.0 mm Less
Maximum Shoulder Reach Outside of Tires - Right 78.9 in 2004.0 mm Less
Moldboard Sideshift - Left 29.1 in 740.0 mm Less
Moldboard Sideshift - Right 31.1 in 790.0 mm Less

Weights

Operating Weight - Typically Equipped 57250.0 lb 25968.0 kg Less
Gross Vehicle Weight - Base* - Front Axle 13994.0 lb 6344.0 kg Less
Gross Vehicle Weight - Base* - Rear Axle 36994.0 lb 16780.0 kg Less
Gross Vehicle Weight - Base* - Total 50980.0 lb 23124.0 kg Less
Gross Vehicle Weight - Typically Equipped - Front Axle 15245.0 lb 6915.0 kg Less
Gross Vehicle Weight - Typically Equipped - Rear Axle 42005.0 lb 19053.0 kg Less
Gross Vehicle Weight - Typically Equipped - Total 57250.0 lb 25968.0 kg Less
Note *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. *Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab. Less

Air Conditioning System

Air Conditioning The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton). Less

Cat Products

Cat M Series Motor Graders 120M AWD

Cat M Series Motor Graders 120M AWD

 Cat M Series Motor Graders 140M

Cat M Series Motor Graders 140M

 Cat M Series Motor Graders 140M AWD

Cat M Series Motor Graders 140M AWD

 Cat M Series Motor Graders 160M AWD

Cat M Series Motor Graders 160M AWD

 Cat M Series Motor Graders 12M3

Cat M Series Motor Graders 12M3

Send Inquiry

*Subject:
Inquire About Cat M Series Motor Graders 14M3 floor price
*Purchase Time:
In a Week
*Country/Region:
Australia
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number:
取消 确定
In a Week In a Month In 3 Month In 6 Month In a Year
*Content:
Australia Canada China India Pakistan United Kingdom United States Afghanistan Akrotiri Albania Algeria American Samoa Andorra Angola Anguilla Antigua and Barbuda Argentina Armenia Aruba Ashmore and Cartier Islands Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegovina Botswana Bouvet Island Brazil British Indian Ocean Territory British Virgin Islands Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Clipperton Island Cocos (Keeling) Islands Colombia Comoros Congo, Democratic Republic of the Congo, Republic of the Cook Islands Coral Sea Islands Costa Rica Cote d'Ivoire Croatia Cuba Cyprus Czech Republic Denmark Dhekelia Djibouti Dominica, Commonwealth of the Dominican Republic Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern and Antarctic Lands Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guernsey Guinea Guinea-Bissau Guyana Haiti Heard Island and McDonald Islands Holy See (Vatican City State) Honduras Hungary Iceland India Indonesia Iran Iraq Ireland Islas Malvinas (Falkland Islands) Isle of Man Israel Italy Jamaica Jan Mayen Japan Jersey Jordan Kazakhstan Kenya Kiribati Korea, Democratic People's Republic of Korea, Republic of Kuwait Kyrgyzstan Laos Latvia Lebanon Lesotho Liberia Libya Liechtenstein Lithuania Luxembourg Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia Moldova Monaco Mongolia Montenegro Montserrat Morocco Mozambique Myanmar Namibia Nauru Navassa Island Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island Northern Mariana Islands Norway Oman Pakistan Palau Palestine Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Island Poland Portugal Puerto Rico Qatar Reunion Romania Russia Rwanda Saint Helena Saint Kitts and Nevis Saint Lucia Saint Martin Saint Pierre and Miquelon Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Serbia Seychelles Sierra Leone Singapore Slovakia Slovenia Solomon Islands Somalia South Africa South Georgia and the South Sandwich Islands Spain Sri Lanka Sudan Suriname Svalbard Swaziland Sweden Switzerland Syria Tajikistan Tanzania Thailand The Former Yugoslav Republic of Macedonia Timor-Leste Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United Kingdom United States United States Minor Outlying Islands United States Virgin Islands Uruguay Uzbekistan Vanuatu Venezuela Vietnam Wake Island Wallis and Futuna Yemen Zambia Zimbabwe
TO TOP