Cat Medium Dozers D6T (NEW)
Cat Medium Dozers D6T (NEW)

Cat Medium Dozers D6T (NEW)

Feature

Engine Model : Cat C9.3 ACERT™

Flywheel Power : 161.0 kW

Operating Weight : 21382.0 kg

Send Inquiry

Contact Cat

Name : Cat

Service Tel : （309）578-6298

E-mail :

Web Site : https://www.caterpillar.com/en.html

Address :

Feature Parameter

Overview

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Engine

Units:
Engine Model Cat C9.3 ACERT™ Cat C9.3 ACERT™ Less
Flywheel Power 215.0 HP 161.0 kW Less
Displacement 567.0 in³ 9.3 l Less
Emissions U.S. EPA Tier 4 Final U.S. EPA Tier 4 Final Less
Net Power - 2,200 rpm - ISO 9249/SAE J1349 215.0 HP 161.0 kW Less
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm 245.0 HP 183.0 kW Less
Note (1) All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD Less
Note (2) Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241. Less
Build Number 19 19 Less

Service Refill Capacities

Fuel Tank 97.2 gal (US) 368.0 l Less
Cooling System 12.2 gal (US) 46.0 l Less
Engine Crankcase 6.5 gal (US) 24.6 l Less
Power Train 39.1 gal (US) 148.0 l Less
Final Drive - Each 3.6 gal (US) 13.5 l Less
Roller Frames - Each 6.6 gal (US) 25.0 l Less
Pivot Shaft Compartment 1.3 gal (US) 5.0 l Less
Hydraulic Tank 16.5 gal (US) 62.5 l Less
DEF Tank 4.5 gal (US) 17.1 l Less

Weights

Operating Weight 47138.0 lb 21382.0 kg Less

Operating Weights

LGP A 53829.0 lb 24417.0 kg Less
LGP S 51385.0 lb 23299.0 kg Less
XL A 47846.0 lb 21703.0 kg Less
XL SU 47138.0 lb 21382.0 kg Less
XL VPAT 53042.0 lb 24060.0 kg Less
XW A 49797.0 lb 22588.0 kg Less
XW SU 48909.0 lb 22185.0 kg Less
XW VPAT 54045.0 lb 24515.0 kg Less
LGP VPAT 54526.0 lb 24733.0 kg Less
Note Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator. Less

Blades - Capacity

LGP A-Blade 6.46 yd³ 4.94 m³ Less
LGP S-Blade 4.96 yd³ 3.79 m³ Less
XL A - Blade 5.17 yd³ 3.95 m³ Less
XL SU - Blade 7.26 yd³ 5.55 m³ Less
XL VPAT - Blade 6.07 yd³ 4.64 m³ Less
XW A - Blade 5.69 yd³ 4.35 m³ Less
XW SU - Blade 7.38 yd³ 5.64 m³ Less
XW VPAT - Blade 6.57 yd³ 5.02 m³ Less
LGP VPAT - Blade 6.57 yd³ 5.02 m³ Less

Blades - Width

LGP A-Blade 16.6 ft 5072.0 mm Less
LGP S-Blade 13.3 ft 4063.0 mm Less
LGP VPAT - Blade 13.7 ft 4160.0 mm Less
XL A - Blade 13.7 ft 4160.0 mm Less
XL SU - Blade 10.7 ft 3261.0 mm Less
XL VPAT - Blade 12.7 ft 3880.0 mm Less
XW A - Blade 14.8 ft 4520.0 mm Less
XW SU - Blade 11.7 ft 3562.0 mm Less
XW VPAT - Blade 13.7 ft 4160.0 mm Less

Dimensions - LGP

Ground Clearance 16.0 in 406.0 mm Less
Ground Pressure (ISO 16754)(3) 5.11 psi 35.2 kPa Less
Length - Basic Tractor(2) 14.5 ft 4415.0 mm Less
Length - Track on Ground 10.67 ft 3245.0 mm Less
Machine Height - To Product Link Antenna(1) 10.83 ft 3303.0 mm Less
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). Less
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less
Width - Tractor - Without Trunnions - Standard Track 10.5 ft 3201.0 mm Less

Dimensions - LGP VPAT

Ground Clearance 16.0 in 406.0 mm Less
Ground Pressure (ISO 16754)(3) 6.28 psi 43.3 kPa Less
Length - Basic Tractor(2) 16.42 ft 5002.0 mm Less
Length - Track on Ground 10.67 ft 3245.0 mm Less
Machine Height - To Product Link Antenna(1) 10.83 ft 3303.0 mm Less
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). Less
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less
Width - Tractor - Without Trunnions - Standard Track 10.33 ft 3143.0 mm Less

Dimensions - XL

Ground Clearance 15.0 in 375.0 mm Less
Ground Pressure (ISO 16754)(3) 8.66 psi 59.7 kPa Less
Length - Basic Tractor(2) 13.83 ft 4210.0 mm Less
Length - Track on Ground 9.25 ft 2814.0 mm Less
Machine Height - To Product Link Antenna(1) 10.67 ft 3253.0 mm Less
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). Less
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less
Width - Tractor - Without Trunnions - Standard Track 8.0 ft 2440.0 mm Less

Dimensions - XL VPAT

Ground Clearance 15.0 in 375.0 mm Less
Ground Pressure (ISO 16754)(3) 9.78 psi 67.4 kPa Less
Length - Basic Tractor(2) 16.08 ft 4894.0 mm Less
Length - Track on Ground 9.25 ft 2814.0 mm Less
Machine Height - To Product Link Antenna(1) 10.67 ft 3253.0 mm Less
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). Less
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less
Width - Tractor - Without Trunnions - Standard Track 8.92 ft 2717.0 mm Less

Dimensions - XW

Ground Clearance 15.0 in 375.0 mm Less
Ground Pressure (ISO 16754)(3) 6.64 psi 45.8 kPa Less
Length - Basic Tractor(2) 13.83 ft 4210.0 mm Less
Length - Track on Ground 9.25 ft 2814.0 mm Less
Machine Height - To Product Link Antenna(1) 10.67 ft 3253.0 mm Less
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). Less
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less
Width - Tractor - Without Trunnions - Standard Track 9.17 ft 2792.0 mm Less

Dimensions - XW VPAT

Ground Clearance 16.0 in 406.0 mm Less
Ground Pressure (ISO 16754)(3) 6.92 psi 47.7 kPa Less
Length - Basic Tractor(2) 16.42 ft 5002.0 mm Less
Length - Track on Ground 10.67 ft 3245.0 mm Less
Machine Height - To Product Link Antenna(1) 10.83 ft 3303.0 mm Less
Note (1) (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). (1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in). Less
Note (2) (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. (2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively. Less
Note (3) (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. (3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754. Less
Width - Tractor - Without Trunnions - Standard Track 9.83 ft 2996.0 mm Less

Cat Products

Cat Small Dozers D3K2 Shiphold

Cat Small Dozers D3K2 Shiphold

 Cat Small Dozers D5K2 Shiphold

Cat Small Dozers D5K2 Shiphold

 Cat Small Dozers D3K2 Tier 4 Final

Cat Small Dozers D3K2 Tier 4 Final

 Cat Small Dozers D4K2 Tier 4 Final/Stage IV

Cat Small Dozers D4K2 Tier 4 Final/Stage IV

 Cat Small Dozers D5K2 Tier 4 Final/Stage IV

Cat Small Dozers D5K2 Tier 4 Final/Stage IV

Send Inquiry

*Subject:
Inquire About Cat Medium Dozers D6T (NEW) floor price
*Purchase Time:
In a Week
*Country/Region:
Australia
*Full Name:
*Current Email:
WebSite:
*Company Name:
*Phone Number:
取消 确定
In a Week In a Month In 3 Month In 6 Month In a Year
*Content:
Australia Canada China India Pakistan United Kingdom United States Afghanistan Akrotiri Albania Algeria American Samoa Andorra Angola Anguilla Antigua and Barbuda Argentina Armenia Aruba Ashmore and Cartier Islands Austria Azerbaijan Bahamas Bahrain Bangladesh Barbados Belarus Belgium Belize Benin Bermuda Bhutan Bolivia Bosnia and Herzegovina Botswana Bouvet Island Brazil British Indian Ocean Territory British Virgin Islands Brunei Darussalam Bulgaria Burkina Faso Burundi Cambodia Cameroon Canada Cape Verde Cayman Islands Central African Republic Chad Chile China Christmas Island Clipperton Island Cocos (Keeling) Islands Colombia Comoros Congo, Democratic Republic of the Congo, Republic of the Cook Islands Coral Sea Islands Costa Rica Cote d'Ivoire Croatia Cuba Cyprus Czech Republic Denmark Dhekelia Djibouti Dominica, Commonwealth of the Dominican Republic Ecuador Egypt El Salvador Equatorial Guinea Eritrea Estonia Ethiopia Faroe Islands Fiji Finland France French Guiana French Polynesia French Southern and Antarctic Lands Gabon Gambia Georgia Germany Ghana Gibraltar Greece Greenland Grenada Guadeloupe Guam Guatemala Guernsey Guinea Guinea-Bissau Guyana Haiti Heard Island and McDonald Islands Holy See (Vatican City State) Honduras Hungary Iceland India Indonesia Iran Iraq Ireland Islas Malvinas (Falkland Islands) Isle of Man Israel Italy Jamaica Jan Mayen Japan Jersey Jordan Kazakhstan Kenya Kiribati Korea, Democratic People's Republic of Korea, Republic of Kuwait Kyrgyzstan Laos Latvia Lebanon Lesotho Liberia Libya Liechtenstein Lithuania Luxembourg Madagascar Malawi Malaysia Maldives Mali Malta Marshall Islands Martinique Mauritania Mauritius Mayotte Mexico Micronesia Moldova Monaco Mongolia Montenegro Montserrat Morocco Mozambique Myanmar Namibia Nauru Navassa Island Nepal Netherlands Netherlands Antilles New Caledonia New Zealand Nicaragua Niger Nigeria Niue Norfolk Island Northern Mariana Islands Norway Oman Pakistan Palau Palestine Panama Papua New Guinea Paraguay Peru Philippines Pitcairn Island Poland Portugal Puerto Rico Qatar Reunion Romania Russia Rwanda Saint Helena Saint Kitts and Nevis Saint Lucia Saint Martin Saint Pierre and Miquelon Saint Vincent and the Grenadines Samoa San Marino Sao Tome and Principe Saudi Arabia Senegal Serbia Seychelles Sierra Leone Singapore Slovakia Slovenia Solomon Islands Somalia South Africa South Georgia and the South Sandwich Islands Spain Sri Lanka Sudan Suriname Svalbard Swaziland Sweden Switzerland Syria Tajikistan Tanzania Thailand The Former Yugoslav Republic of Macedonia Timor-Leste Togo Tokelau Tonga Trinidad and Tobago Tunisia Turkey Turkmenistan Turks and Caicos Islands Tuvalu Uganda Ukraine United Arab Emirates United Kingdom United States United States Minor Outlying Islands United States Virgin Islands Uruguay Uzbekistan Vanuatu Venezuela Vietnam Wake Island Wallis and Futuna Yemen Zambia Zimbabwe
TO TOP